I got a new bowl mold that is deeper than any I have used in the past. I had this full fused flat piece for a while but hadn't decided what to do with it. It fit this mold perfectly. So a slumping I did go. The mold has a 1 inch flange round the top and my piece was about 1/2 inch inside that flange. It just so happened when it slumped the top edge came just to the top edge of the vertical sides. So the flange did not come into play. I like the depth of the bowl and will probably use this mold a lot. I noticed on the outside the lavender opal glass slightly got a crinkled texture around the top 1 inch. I think that was caused by the larger edge shrinking into the smaller sides of the bowl.
No comments:
Post a Comment